七麦数据

Local Haze crowdsources outdoor air quality data from many different sources and delivers it to your iPhone and Apple Watch.

In release 2.3, as a Local Haze subscriber, you can now get air quality readings “at a glance” on your Apple Watch, widgets on your phone, and notifications for a sensor where significant changes in air quality have been detected.

About Local Haze

Local Haze reports air quality data from a variety of sensors across six continents, including AirGradient, AirNow, PurpleAir, Sensor.Community and uRADMonitor. In addition to viewing current air quality conditions, using Local Haze allows you to share sensor maps displaying air quality readings anywhere in the world.

The World Health Organization and the U.S. Environmental Protection Agency (EPA) have developed guidelines for safe air quality as impacted by chemical pollutants and particulate matter (PM). PM smaller than 10 micrometers poses problems because it can enter the bloodstream. Local Haze displays the level of smaller PM 2.5 particles, which pose the most significant health risk.

Local Haze Apple Watch app

If you have disabled Automatic App Install on your Apple Watch, you can follow these directions to manually install it: https://support.apple.com/en-ca/guide/watch/apd99e3c6a68/watchos

Local Haze Widgets

A Local Haze widget allows subscribers, at a glance, to see a snapshot of their favorite AQ sensor. A tap on the widget displays the Local Haze sensor details screen. For directions on how to add a widget, visit this page: https://localhaze.humanlogic.com/2023/07/22/adding-a-local-haze-widget/

Notifications in Local Haze

To set a notification, subscribers can tap the bell icon on the sensor details screen. Notifications will be sent to your phone when the air quality changes.

How Local Haze Displays Air Quality Data

Local Haze displays the EPA’s Air Quality Index (AQI) and a confidence rating for each sensor reading. The confidence rating is a feature that is unique to Local Haze and depends on many factors, including sensor maintenance and data freshness.

Each AQ sensor reading is displayed as a face icon according to the key below, with a badge on the lower right that represents a confidence rating:

Green Face: Air quality is Good.
Air quality is considered satisfactory, and air pollution poses little or no risk.

Yellow Face: Air quality is Moderate.
Air quality is acceptable. For some pollutants, there may 
be a moderate health concern.

Orange Face: Air quality is Unhealthy for sensitive groups.
The general public is not likely to be affected, but people with heart and lung disease, older adults, and children are at greater risk.

Red Face: Air quality is Unhealthy
Everyone may begin to experience some adverse health effects, and members of the sensitive groups may experience more serious effects.

Black face mask with respirator: Air quality is Hazardous.
Everyone may experience more serious health effects with possible emergency conditions. The entire population is likely to be affected.

Note: The source for the above AQ index classification is from Air Quality Index (AQI) Basics - EPA: https://www.airnow.gov/aqi/aqi-basics/

The confidence rating badges are:

Green badge with thumbs up: High confidence in the air sensor reading.

Yellow badge with OK sign: OK confidence in the air sensor reading.

Red badge with thumbs down: Low confidence in the air sensor reading.

We hope you enjoy using Local Haze! If you have any feedback about Local Haze please email us at localhaze@humanlogic.com or visit https://localhaze.humanlogic.com/

Local Haze crowdsources outdoor air quality data from many different sources and delivers it to your iPhone and Apple Watch.

In release 2.3, as a Local Haze subscriber, you can now get air quality readings “at a glance” on your Apple Watch, widgets on your phone, and notifications for a sensor where significant changes in air quality have been detected.

About Local Haze

Local Haze reports air quality data from a variety of sensors across six continents, including AirGradient, AirNow, PurpleAir, Sensor.Community and uRADMonitor. In addition to viewing current air quality conditions, using Local Haze allows you to share sensor maps displaying air quality readings anywhere in the world.

The World Health Organization and the U.S. Environmental Protection Agency (EPA) have developed guidelines for safe air quality as impacted by chemical pollutants and particulate matter (PM). PM smaller than 10 micrometers poses problems because it can enter the bloodstream. Local Haze displays the level of smaller PM 2.5 particles, which pose the most significant health risk.

Local Haze Apple Watch app

If you have disabled Automatic App Install on your Apple Watch, you can follow these directions to manually install it: https://support.apple.com/en-ca/guide/watch/apd99e3c6a68/watchos

Local Haze Widgets

A Local Haze widget allows subscribers, at a glance, to see a snapshot of their favorite AQ sensor. A tap on the widget displays the Local Haze sensor details screen. For directions on how to add a widget, visit this page: https://localhaze.humanlogic.com/2023/07/22/adding-a-local-haze-widget/

Notifications in Local Haze

To set a notification, subscribers can tap the bell icon on the sensor details screen. Notifications will be sent to your phone when the air quality changes.

How Local Haze Displays Air Quality Data

Local Haze displays the EPA’s Air Quality Index (AQI) and a confidence rating for each sensor reading. The confidence rating is a feature that is unique to Local Haze and depends on many factors, including sensor maintenance and data freshness.

Each AQ sensor reading is displayed as a face icon according to the key below, with a badge on the lower right that represents a confidence rating:

Green Face: Air quality is Good.
Air quality is considered satisfactory, and air pollution poses little or no risk.

Yellow Face: Air quality is Moderate.
Air quality is acceptable. For some pollutants, there may 
be a moderate health concern.

Orange Face: Air quality is Unhealthy for sensitive groups.
The general public is not likely to be affected, but people with heart and lung disease, older adults, and children are at greater risk.

Red Face: Air quality is Unhealthy
Everyone may begin to experience some adverse health effects, and members of the sensitive groups may experience more serious effects.

Black face mask with respirator: Air quality is Hazardous.
Everyone may experience more serious health effects with possible emergency conditions. The entire population is likely to be affected.

Note: The source for the above AQ index classification is from Air Quality Index (AQI) Basics - EPA: https://www.airnow.gov/aqi/aqi-basics/

The confidence rating badges are:

Green badge with thumbs up: High confidence in the air sensor reading.

Yellow badge with OK sign: OK confidence in the air sensor reading.

Red badge with thumbs down: Low confidence in the air sensor reading.

We hope you enjoy using Local Haze! If you have any feedback about Local Haze please email us at localhaze@humanlogic.com or visit https://localhaze.humanlogic.com/

Local Haze crowdsources outdoor air quality data from many different sources and delivers it to your iPhone for free.

In release 2.2, Local Haze subscribers now get air quality “at-a-glance” with Home Screen widgets in addition to the ability to subscribe to notifications for a sensor for significant changes in air quality.

About Local Haze

Local Haze reports air quality data from a variety of sensors including: AirNow, PurpleAir, Sensor.Community and uRADMonitor. In addition to viewing current air quality conditions, using Local Haze allows you to share sensor maps displaying air quality readings anywhere in the world.

The World Health Organization and U.S. Environmental Protection Agency (EPA) have developed guidelines for safe air quality as impacted by chemical pollutants and particulate matter (PM). PM smaller than 10 micrometers poses problems because it can enter the bloodstream. Local Haze displays the level of smaller PM 2.5 particles, which pose the most significant risk to health.

Add a Local Haze widget

See a snapshot of your favorite AQ sensor anytime you glance at your phone. One tap takes you to the AQ sensor details screen. Saves time and reduces scrolling or searching for specific AQ sensor data. For directions on how to add a Local Haze widget, visit this page:
https://localhaze.humanlogic.com/2023/07/22/adding-a-local-haze-widget/

Notifications in Local Haze

To set a notification, subscribers can tap on the bell icon on any AirNow, PurpleAir, Sensor.Community and uRADMonitor sensor detail screen. Notifications will be sent to your phone when the air quality changes.

How Local Haze displays air quality data

Local Haze displays the EPA’s Air Quality Index (AQI) and a confidence rating for each sensor reading. The confidence rating is a feature that is unique to Local Haze and depends on many factors, including sensor maintenance and data freshness.

Each AQ sensor reading is displayed according to the key below, with a badge on the lower right that represents a confidence rating:

Green Face: Air quality is Good.
Air quality is considered satisfactory, and air pollution poses little or no risk.

Yellow Face: Air quality is Moderate.
Air quality is acceptable. For some pollutants, there may 
be a moderate health concern.

Orange Face: Air quality is Unhealthy for sensitive groups.
The general public is not likely to be affected, but persons with heart & lung disease, older adults and children, are 
at greater risk from the presence of ozone or particles.

Red Face: Air quality is Unhealthy
Everyone may begin to experience some adverse health effects, and members of the sensitive groups may experience more serious effects.

Black face mask with respirator: Air quality is Hazardous.
Everyone may experience more serious health effects with possible emergency conditions. The entire population is more likely to be affected.

Note: The source for the above AQ index classification is from Air Quality Index (AQI) Basics - EPA: https://www.airnow.gov/aqi/aqi-basics/

The confidence rating badges are:

Green badge with thumbs up: High confidence in the air sensor reading.

Yellow badge with OK sign: OK confidence in the air sensor reading.

Red badge with thumbs down: Low confidence in the air sensor reading.

We hope you enjoy using Local Haze! If you have any feedback about Local Haze please email us at localhaze@humanlogic.com or visit https://localhaze.humanlogic.com/

Local Haze crowdsources outdoor air quality data from many different sources and delivers it to your iPhone for free.

In release 2.2, Local Haze subscribers now get air quality “at-a-glance” with Home Screen widgets in addition to the ability to subscribe to notifications for a sensor for significant changes in air quality.

About Local Haze

Local Haze reports air quality data from a variety of sensors including: PurpleAir, Sensor.Community, uRADMonitor, AirNow and the U.S. Department of State. In addition to viewing current air quality conditions, using Local Haze allows you to share sensor maps displaying air quality readings anywhere in the world.

The World Health Organization and U.S. Environmental Protection Agency (EPA) have developed guidelines for safe air quality as impacted by chemical pollutants and particulate matter (PM). PM smaller than 10 micrometers poses problems because it can enter the bloodstream. Local Haze displays the level of smaller PM 2.5 particles, which pose the most significant risk to health.

Add a Local Haze widget

See a snapshot of your favorite AQ sensor anytime you glance at your phone. One tap takes you to the AQ sensor details screen. Saves time and reduces scrolling or searching for specific AQ sensor data. For directions on how to add a Local Haze widget, visit this page:
https://localhaze.humanlogic.com/2023/07/22/adding-a-local-haze-widget/

Notifications in Local Haze

To set a notification, subscribers can tap on the bell icon on any PurpleAir, Sensor.Communit, uRADMonitor and AirNow sensor detail screen. Notifications will be sent to your phone when the air quality changes.

How Local Haze displays air quality data

Local Haze displays the EPA’s Air Quality Index (AQI) and a confidence rating for each sensor reading. The confidence rating is a feature that is unique to Local Haze and depends on many factors, including sensor maintenance and data freshness.

Each AQ sensor reading is displayed according to the key below, with a badge on the lower right that represents a confidence rating:

Green Face: Air quality is Good.
Air quality is considered satisfactory, and air pollution poses little or no risk.

Yellow Face: Air quality is Moderate.
Air quality is acceptable. For some pollutants, there may 
be a moderate health concern.

Orange Face: Air quality is Unhealthy for sensitive groups.
The general public is not likely to be affected, but persons with heart & lung disease, older adults and children, are 
at greater risk from the presence of ozone or particles.

Red Face: Air quality is Unhealthy
Everyone may begin to experience some adverse health effects, and members of the sensitive groups may experience more serious effects.

Black face mask with respirator: Air quality is Hazardous.
Everyone may experience more serious health effects with possible emergency conditions. The entire population is more likely to be affected.

Note: The source for the above AQ index classification is from Air Quality Index (AQI) Basics - EPA: https://www.airnow.gov/aqi/aqi-basics/

The confidence rating badges are:

Green badge with thumbs up: High confidence in the air sensor reading.

Yellow badge with OK sign: OK confidence in the air sensor reading.

Red badge with thumbs down: Low confidence in the air sensor reading.

We hope you enjoy using Local Haze! If you have any feedback about Local Haze please email us at localhaze@humanlogic.com or visit https://localhaze.humanlogic.com/

Local Haze crowdsources outdoor air quality data from many different sources and delivers it to your iPhone for free.

In release 2.2, Local Haze subscribers now get air quality “at-a-glance” with Home Screen widgets in addition to the ability to subscribe to notifications for a sensor for significant changes in air quality.

About Local Haze

Local Haze reports air quality data from a variety of sensors including: PurpleAir, Sensor.Community, uRADMonitor, AirNow and the U.S. Department of State. In addition to viewing current air quality conditions, using Local Haze allows you to share sensor maps displaying air quality readings anywhere in the world.

The World Health Organization and U.S. Environmental Protection Agency (EPA) have developed guidelines for safe air quality as impacted by chemical pollutants and particulate matter (PM). PM smaller than 10 micrometers poses problems because it can enter the bloodstream. Local Haze displays the level of smaller PM 2.5 particles, which pose the most significant risk to health.

Add a Local Haze widget

See a snapshot of your favorite AQ sensor anytime you glance at your phone. One tap takes you to the AQ sensor details screen. Saves time and reduces scrolling or searching for specific AQ sensor data. For directions on how to add a Local Haze widget, visit this page:
https://localhaze.humanlogic.com/2023/07/22/adding-a-local-haze-widget/

Notifications in Local Haze

To set a notification, subscribers can tap on the bell icon on any PurpleAir, Sensor.Community and uRADMonitor sensor detail screen. Notifications will be sent to your phone when the air quality changes.

How Local Haze displays air quality data

Local Haze displays the EPA’s Air Quality Index (AQI) and a confidence rating for each sensor reading. The confidence rating is a feature that is unique to Local Haze and depends on many factors, including sensor maintenance and data freshness.

Each AQ sensor reading is displayed according to the key below, with a badge on the lower right that represents a confidence rating:

Green Face: Air quality is Good.
Air quality is considered satisfactory, and air pollution poses little or no risk.

Yellow Face: Air quality is Moderate.
Air quality is acceptable. For some pollutants, there may 
be a moderate health concern.

Orange Face: Air quality is Unhealthy for sensitive groups.
The general public is not likely to be affected, but persons with heart & lung disease, older adults and children, are 
at greater risk from the presence of ozone or particles.

Red Face: Air quality is Unhealthy
Everyone may begin to experience some adverse health effects, and members of the sensitive groups may experience more serious effects.

Black face mask with respirator: Air quality is Hazardous.
Everyone may experience more serious health effects with possible emergency conditions. The entire population is more likely to be affected.

Note: The source for the above AQ index classification is from Air Quality Index (AQI) Basics - EPA: https://www.airnow.gov/aqi/aqi-basics/

The confidence rating badges are:

Green badge with thumbs up: High confidence in the air sensor reading.

Yellow badge with OK sign: OK confidence in the air sensor reading.

Red badge with thumbs down: Low confidence in the air sensor reading.

We hope you enjoy using Local Haze! If you have any feedback about Local Haze please email us at localhaze@humanlogic.com or visit https://localhaze.humanlogic.com/

Local Haze crowdsources outdoor air quality data from many different sources and delivers it to your iPhone for free.

In release 2.2, Local Haze subscribers now get air quality “at-a-glance” with Home Screen widgets in addition to the ability to subscribe to notifications for a sensor for significant changes in air quality.

About Local Haze

Local Haze reports air quality data from a variety of sensors including: PurpleAir, Sensor.Community, uRADMonitor, AirNow and the U.S. Department of State. In addition to viewing current air quality conditions, using Local Haze allows you to share sensor maps displaying air quality readings anywhere in the world.

The World Health Organization and U.S. Environmental Protection Agency (EPA) have developed guidelines for safe air quality as impacted by chemical pollutants and particulate matter (PM). PM smaller than 10 micrometers poses problems because it can enter the bloodstream. Local Haze displays the level of smaller PM 2.5 particles, which pose the most significant risk to health.

Add a Local Haze widget

See a snapshot of your favorite AQ sensor anytime you glance at your phone. One tap takes you to the AQ sensor details screen. Saves time and reduces scrolling or searching for specific AQ sensor data. For directions on how to add a Local Haze widget, visit this page:
https://localhaze.humanlogic.com/2023/07/22/adding-a-local-haze-widget/

Notifications in Local Haze

To set a notification, subscribers can tap on the bell icon on any PurpleAir, Sensor.Community and uRADMonitor sensor detail screen. Notifications will be sent to your phone when the air quality changes.

How Local Haze displays air quality data

Local Haze displays the EPA’s Air Quality Index (AQI) and a confidence rating for each sensor reading. The confidence rating is a feature that is unique to Local Haze and depends on many factors, including sensor maintenance and data freshness.

Each AQ sensor reading is displayed according to the key below, with a badge on the lower right that represents a confidence rating:

Green Face: Air quality is Good.
Air quality is considered satisfactory, and air pollution poses little or no risk.

Yellow Face: Air quality is Moderate.
Air quality is acceptable. For some pollutants, there may 
be a moderate health concern.

Orange Face: Air quality is Unhealthy for sensitive groups.
The general public is not likely to be affected, but persons with heart & lung disease, older adults and children, are 
at greater risk from the presence of ozone or particles.

Red Face: Air quality is Unhealthy
Everyone may begin to experience some adverse health effects, and members of the sensitive groups may experience more serious effects.

Black face mask with respirator: Air quality is Hazardous.
Everyone may experience more serious health effects with possible emergency conditions. The entire population is more likely to be affected.

Note: The source for the above AQ index classification is from Air Quality Index (AQI) Basics - EPA: https://www.airnow.gov/aqi/aqi-basics/

The confidence rating badges are:

Green badge with thumbs up: High confidence in the air sensor reading.

Yellow badge with OK sign: OK confidence in the air sensor reading.

Red badge with thumbs down: Low confidence in the air sensor reading.

We hope you enjoy using Local Haze! If you have any feedback about Local Haze please email us at localhaze@humanlogic.com or visit https://localhaze.humanlogic.com/

Local Haze crowdsources outdoor air quality data from many different sources and delivers it to your iPhone.

Local Haze reports air quality data from a variety of sensors including: PurpleAir, Sensor.Community, uRADMonitor, AirNow and the U.S. Department of State. In addition to viewing current air quality conditions, using Local Haze allows you to share sensor maps displaying air quality readings anywhere in the world.

The World Health Organization and U.S. Environmental Protection Agency (EPA) have developed guidelines for safe air quality as impacted by chemical pollutants and particulate matter (PM). 

PM smaller than 10 micrometers poses problems because it can enter the bloodstream. Local Haze displays the level of smaller PM 2.5 particles, which pose the most significant risk to health.

Notifications: New subscription feature in version 2.1 of Local Haze!

Now you can subscribe to receive a notification when there is a significant change in the air quality readings for sensors by PurpleAir, Sensor.Community and uRADMonitor. To set a notification, tap on the bell icon on any PurpleAir sensor detail screen. Notifications will be sent to your phone when the air quality changes.

Terms of Use: https://localhaze.humanlogic.com/tou
Privacy Policy: https://localhaze.humanlogic.com/privacy

How Local Haze displays air quality data

Local Haze displays the EPA’s Air Quality Index (AQI) and a confidence rating for each sensor reading. The confidence rating is a feature that is unique to Local Haze and depends on many factors, including sensor maintenance and data freshness.

Each AQ sensor reading is displayed according to the key below, with a badge on the lower right that represents a confidence rating:

Green Face: Air quality is Good.
Air quality is considered satisfactory, and air pollution poses little or no risk.

Yellow Face: Air quality is Moderate.
Air quality is acceptable. For some pollutants, there may 
be a moderate health concern.

Orange Face: Air quality is Unhealthy for sensitive groups.
The general public is not likely to be affected, but persons with heart & lung disease, older adults and children, are 
at greater risk from the presence of ozone or particles.

Red Face: Air quality is Unhealthy
Everyone may begin to experience some adverse health effects, and members of the sensitive groups may experience more serious effects.

Black face mask with respirator: Air quality is Hazardous.
Everyone may experience more serious health effects with possible emergency conditions. The entire population is more likely to be affected.


Note: The source for the above AQ index classification is Air Quality Index (AQI) Basics - EPA

The confidence rating badges are:


Green badge with thumbs up: High confidence in the air sensor reading.

Yellow badge with OK sign: OK confidence in the air sensor reading.

Red badge with thumbs down: Low confidence in the air sensor reading.

We hope you enjoy using Local Haze! If you have any feedback about Local Haze please email us at localhaze@humanlogic.com or visit https://localhaze.humanlogic.com/