七麦数据

- All in one: The testo Smart App supports you with measurements on refrigeration, air conditioning, and heating systems, as well as in ensuring the safety and quality of food and frying oil, and in monitoring indoor climate and storage conditions.
- Fast: Graphically descriptive display of measured values, e.g. as a table, for quick interpretation of results.
- Efficient: Create digital measurement reports incl. photos as PDF/ CSV files on site and send them via e-mail.


The testo Smart App is compatible with the following Bluetooth®-enabled measuring instruments from Testo:
- Thermal imager testo 860i for smartphones
- All Testo Smart Probes
- Digital manifolds testo 550s/557s/558s/550i/570s and testo 550/557
- Digital refrigerant scale testo 560i
- Vacuum pump testo 565i
- Flue gas analyser testo 300/310 II/310 II EN/310 II EN
- Vacuum gauge testo 552
- Clamp meter testo 770-3
- Volume flow hood testo 420
- Compact HVAC measuring instruments
- Frying oil tester testo 270 BT
- Temperature meter testo 110 Food
- Dual purpose IR and penetration thermometer testo 104-IR BT
- Data loggers 174 T BT & 174 H BT
- Online data loggers testo 160, testo 162 & testo 164 GW


Applications with the testo Smart App

Refrigeration systems, air conditioning systems and heat pumps:
- Leak test: Recording and analysis of the pressure drop curve.
- Superheat and subcooling: Automatic determination of condensation and evaporation temperature and calculation of superheat / subcooling.
- Target superheat: Automatic calculation of target superheat
- Automatic refrigerant charging by weight, by superheat, by subcooling
- Vacuum measurement: Graphical progress display of the measurement with indication of start and differential value

Indoor climate monitoring:
- Inndor air quality: automatic calculation of the dew point and wet-bulb temperature
- Temperature, humidity, lux, UV, pressure, CO2: the right data logger for every application – from a single solution to an online monitoring system

Ventilation systems:
- Volume flow: After the intuitive input of the duct cross-section, the app calculates the volume flow fully automatically.
- Diffuser measurements: simple parameterisation of the diffuser (dimensions and geometry), comparison of the volume flows of several diffusers when setting up a ventilation system, continuous and multi-point average calculation.

Heating systems:- Flue gas measurement: Second screen function in combination with testo 300
- Measurement of gas flow and static gas pressure: Also possible parallel to the flue gas measurement (delta P)
- Measurement of flow and return temperatures (delta T)

Thermography:
- Determining Delta T on heating, refrigeration/air conditioning and industrial systems
- Detecting hot/cold spots
- Assessing the risk of mould

Food safety:
Temperature Control Points (CP/CCP):
- Seamless documentation of measured values to fulfil HACCP specifications
- Individually definable limit values and measurement comments within the App for each measurement point
- Reporting and data export for regulatory requirements and internal quality assurance

Frying oil quality:
- Seamless documentation of measured values as well as calibration and adjustment of the measurement instrument
- Individually definable limit values and measurement comments within the App for each measurement point
- Reporting and data export for regulatory requirements and internal quality assurance

---------------------------------------------------------
Terms of Use:
https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

Privacy Policy:
https://www.testo.com/en/company/privacy-policy-app

- All in one: The testo Smart App supports you with measurements on refrigeration, air conditioning, and heating systems, as well as in ensuring the safety and quality of food and frying oil, and in monitoring indoor climate and storage conditions.
- Fast: Graphically descriptive display of measured values, e.g. as a table, for quick interpretation of results.
- Efficient: Create digital measurement reports incl. photos as PDF/ CSV files on site and send them via e-mail.


The testo Smart App is compatible with the following Bluetooth®-enabled measuring instruments from Testo:
- Thermal imager testo 860i for smartphones
- All Testo Smart Probes
- Digital manifolds testo 550s/557s/558s/550i/570s and testo 550/557
- Digital refrigerant scale testo 560i
- Vacuum pump testo 565i
- Flue gas analyser testo 300/310 II/310 II EN/310 II EN
- Vacuum gauge testo 552
- Clamp meter testo 770-3
- Volume flow hood testo 420
- Compact HVAC measuring instruments
- Frying oil tester testo 270 BT
- Temperature meter testo 110 Food
- Dual purpose IR and penetration thermometer testo 104-IR BT
- Data loggers 174 T BT & 174 H BT
- Online data loggers testo 160, testo 162 & testo 164 GW


Applications with the testo Smart App

Refrigeration systems, air conditioning systems and heat pumps:
- Leak test: Recording and analysis of the pressure drop curve.
- Superheat and subcooling: Automatic determination of condensation and evaporation temperature and calculation of superheat / subcooling.
- Target superheat: Automatic calculation of target superheat
- Automatic refrigerant charging by weight, by superheat, by subcooling
- Vacuum measurement: Graphical progress display of the measurement with indication of start and differential value

Indoor climate monitoring:
- Inndor air quality: automatic calculation of the dew point and wet-bulb temperature
- Temperature, humidity, lux, UV, pressure, CO2: the right data logger for every application – from a single solution to an online monitoring system

Ventilation systems:
- Volume flow: After the intuitive input of the duct cross-section, the app calculates the volume flow fully automatically.
- Diffuser measurements: simple parameterisation of the diffuser (dimensions and geometry), comparison of the volume flows of several diffusers when setting up a ventilation system, continuous and multi-point average calculation.

Heating systems:- Flue gas measurement: Second screen function in combination with testo 300
- Measurement of gas flow and static gas pressure: Also possible parallel to the flue gas measurement (delta P)
- Measurement of flow and return temperatures (delta T)

Thermography:
- Determining Delta T on heating, refrigeration/air conditioning and industrial systems
- Detecting hot/cold spots
- Assessing the risk of mould

Food safety:
Temperature Control Points (CP/CCP):
- Seamless documentation of measured values to fulfil HACCP specifications
- Individually definable limit values and measurement comments within the App for each measurement point
- Reporting and data export for regulatory requirements and internal quality assurance

Frying oil quality:
- Seamless documentation of measured values as well as calibration and adjustment of the measurement instrument
- Individually definable limit values and measurement comments within the App for each measurement point
- Reporting and data export for regulatory requirements and internal quality assurance

---------------------------------------------------------
Terms of Use:
https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

Privacy Policy:
https://www.testo.com/en/company/privacy-policy-app

- All in one: The testo Smart App supports you with measurements on refrigeration, air conditioning, and heating systems, as well as in ensuring the safety and quality of food and frying oil, and in monitoring indoor climate and storage conditions.
- Fast: Graphically descriptive display of measured values, e.g. as a table, for quick interpretation of results.
- Efficient: Create digital measurement reports incl. photos as PDF/ CSV files on site and send them via e-mail.


The testo Smart App is compatible with the following Bluetooth®-enabled measuring instruments from Testo:
- Thermal imager testo 860i for smartphones
- All Testo Smart Probes
- Digital manifolds testo 550s/557s/558s/550i/570s and testo 550/557
- Digital refrigerant scale testo 560i
- Vacuum pump testo 565i
- Flue gas analyser testo 300/310 II/310 II EN/310 II EN
- Vacuum gauge testo 552
- Clamp meter testo 770-3
- Volume flow hood testo 420
- Compact HVAC measuring instruments
- Frying oil tester testo 270 BT
- Temperature meter testo 110 Food
- Dual purpose IR and penetration thermometer testo 104-IR BT
- Data loggers 174 T BT & 174 H BT
- Online data loggers testo 160, testo 162 & testo 164 GW


Applications with the testo Smart App

Refrigeration systems, air conditioning systems and heat pumps:
- Leak test: Recording and analysis of the pressure drop curve.
- Superheat and subcooling: Automatic determination of condensation and evaporation temperature and calculation of superheat / subcooling.
- Target superheat: Automatic calculation of target superheat
- Automatic refrigerant charging by weight, by superheat, by subcooling
- Vacuum measurement: Graphical progress display of the measurement with indication of start and differential value

Indoor climate monitoring:
- Inndor air quality: automatic calculation of the dew point and wet-bulb temperature
- Temperature, humidity, lux, UV, pressure, CO2: the right data logger for every application – from a single solution to an online monitoring system

Ventilation systems:
- Volume flow: After the intuitive input of the duct cross-section, the app calculates the volume flow fully automatically.
- Diffuser measurements: simple parameterisation of the diffuser (dimensions and geometry), comparison of the volume flows of several diffusers when setting up a ventilation system, continuous and multi-point average calculation.

Heating systems:- Flue gas measurement: Second screen function in combination with testo 300
- Measurement of gas flow and static gas pressure: Also possible parallel to the flue gas measurement (delta P)
- Measurement of flow and return temperatures (delta T)

Thermography:
- Determining Delta T on heating, refrigeration/air conditioning and industrial systems
- Detecting hot/cold spots
- Assessing the risk of mould

Food safety:
Temperature Control Points (CP/CCP):
- Seamless documentation of measured values to fulfil HACCP specifications
- Individually definable limit values and measurement comments within the App for each measurement point
- Reporting and data export for regulatory requirements and internal quality assurance

Frying oil quality:
- Seamless documentation of measured values as well as calibration and adjustment of the measurement instrument
- Individually definable limit values and measurement comments within the App for each measurement point
- Reporting and data export for regulatory requirements and internal quality assurance

---------------------------------------------------------
Terms of Use:
https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

Privacy Policy:
https://www.testo.com/en/company/privacy-policy-app

- All in one: The testo Smart App supports you with measurements on refrigeration, air conditioning, and heating systems, as well as in ensuring the safety and quality of food and frying oil, and in monitoring indoor climate and storage conditions.
- Fast: Graphically descriptive display of measured values, e.g. as a table, for quick interpretation of results.
- Efficient: Create digital measurement reports incl. photos as PDF/ CSV files on site and send them via e-mail.

NEW in the testo Smart App:
Data logger measurement program: Control temperature and humidity in indoor environments. Configure and analyse your measurement data, generate a report, or export your data.

The testo Smart App is compatible with the following Bluetooth®-enabled measuring instruments from Testo:
- All Testo Smart Probes
- Digital manifolds testo 550s/557s/558s/550i/570s and testo 550/557
- Digital refrigerant scale testo 560i
- Vacuum pump testo 565i
- Flue gas analyser testo 300/310 II/310 II EN/310 II EN
- Vacuum gauge testo 552
- Clamp meter testo 770-3
- Volume flow hood testo 420
- Compact HVAC measuring instruments
- Frying oil tester testo 270 BT
- Temperature meter testo 110 Food
- Dual purpose IR and penetration thermometer testo 104-IR BT
- Data logger 174 T BT & 174 H BT


Applications with the testo Smart App
Refrigeration systems, air conditioning systems and heat pumps:
- Leak test: Recording and analysis of the pressure drop curve.
- Superheat and subcooling: Automatic determination of condensation and evaporation temperature and calculation of superheat / subcooling.
- Target superheat: Automatic calculation of target superheat
- Automatic refrigerant charging by weight, by superheat, by subcooling
- Vacuum measurement: Graphical progress display of the measurement with indication of start and differential value


Indoor air quality and comfort level:
- Temperature and humidity: Automatic calculation of dew point and wet bulb temperature

Indoor climate control:
- Temperature and humidity: Define your measurement sites, corresponding limit values, measurement intervals, and much more. Customise your data logger to suit your specific needs. A PIN lock ensures your data is protected from unauthorised access.


Ventilation systems:
- Volume flow: After the intuitive input of the duct cross-section, the app calculates the volume flow fully automatically.
- Diffuser measurements: simple parameterisation of the diffuser (dimensions and geometry), comparison of the volume flows of several diffusers when setting up a ventilation system, continuous and multi-point average calculation.


Heating systems:- Flue gas measurement: Second screen function in combination with testo 300
- Measurement of gas flow and static gas pressure: Also possible parallel to the flue gas measurement (delta P)
- Measurement of flow and return temperatures (delta T)


Food safety:
Temperature Control Points (CP/CCP):
- Seamless documentation of measured values to fulfil HACCP specifications
- Individually definable limit values and measurement comments within the App for each measurement point
- Reporting and data export for regulatory requirements and internal quality assurance

Frying oil quality:
- Seamless documentation of measured values as well as calibration and adjustment of the measurement instrument
- Individually definable limit values and measurement comments within the App for each measurement point
- Reporting and data export for regulatory requirements and internal quality assurance

---------------------------------------------------------
Terms of Use:
https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

Privacy Policy:
https://www.testo.com/en/company/privacy-policy-app

- All in one: The testo Smart App supports you with measurements on refrigeration, air conditioning, and heating systems, as well as in ensuring the safety and quality of food and frying oil, and in monitoring indoor climate and storage conditions.
- Fast: Graphically descriptive display of measured values, e.g. as a table, for quick interpretation of results.
- Efficient: Create digital measurement reports incl. photos as PDF/ CSV files on site and send them via e-mail.

NEW in the testo Smart App:
Data logger measurement program: Control temperature and humidity in indoor environments. Configure and analyse your measurement data, generate a report, or export your data.

The testo Smart App is compatible with the following Bluetooth®-enabled measuring instruments from Testo:
- All Testo Smart Probes
- Digital manifolds testo 550s/557s/550i/570s and testo 550/557
- Digital refrigerant scale testo 560i
- Vacuum pump testo 565i
- Flue gas analyser testo 300/310 II/310 II EN/310 II EN
- Vacuum gauge testo 552
- Clamp meter testo 770-3
- Volume flow hood testo 420
- Compact HVAC measuring instruments
- Frying oil tester testo 270 BT
- Temperature meter testo 110 Food
- Dual purpose IR and penetration thermometer testo 104-IR BT
- Data logger 174 T BT & 174 H BT


Applications with the testo Smart App
Refrigeration systems, air conditioning systems and heat pumps:
- Leak test: Recording and analysis of the pressure drop curve.
- Superheat and subcooling: Automatic determination of condensation and evaporation temperature and calculation of superheat / subcooling.
- Target superheat: Automatic calculation of target superheat
- Automatic refrigerant charging by weight, by superheat, by subcooling
- Vacuum measurement: Graphical progress display of the measurement with indication of start and differential value


Indoor air quality and comfort level:
- Temperature and humidity: Automatic calculation of dew point and wet bulb temperature

Indoor climate control:
- Temperature and humidity: Define your measurement sites, corresponding limit values, measurement intervals, and much more. Customise your data logger to suit your specific needs. A PIN lock ensures your data is protected from unauthorised access.


Ventilation systems:
- Volume flow: After the intuitive input of the duct cross-section, the app calculates the volume flow fully automatically.
- Diffuser measurements: simple parameterisation of the diffuser (dimensions and geometry), comparison of the volume flows of several diffusers when setting up a ventilation system, continuous and multi-point average calculation.


Heating systems:- Flue gas measurement: Second screen function in combination with testo 300
- Measurement of gas flow and static gas pressure: Also possible parallel to the flue gas measurement (delta P)
- Measurement of flow and return temperatures (delta T)


Food safety:
Temperature Control Points (CP/CCP):
- Seamless documentation of measured values to fulfil HACCP specifications
- Individually definable limit values and measurement comments within the App for each measurement point
- Reporting and data export for regulatory requirements and internal quality assurance

Frying oil quality:
- Seamless documentation of measured values as well as calibration and adjustment of the measurement instrument
- Individually definable limit values and measurement comments within the App for each measurement point
- Reporting and data export for regulatory requirements and internal quality assurance

---------------------------------------------------------
Terms of Use:
https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

Privacy Policy:
https://www.testo.com/en/company/privacy-policy-app

- All in one: The testo Smart App guides you easily and quickly through measurements on refrigeration, air conditioning and and heating systems.
- Fast: Graphically descriptive display of measured values, e.g. as a table, for quick interpretation of results.
- Efficient: Create digital measurement reports incl. photos as PDF/ CSV files on site and send them via e-mail.

NEW in the testo Smart App:
- Multi-site measurement PRO measurement program: With this first-class measurement program, you can simplify and professionalise the documentation of your measured values at different measurement sites.
- Air balancing PRO measurement program: Accelerate your workflow and eliminate errors: The new measurement program "Air balancing" brings you more efficiency and speed in the commissioning and adjustment of ventilation and air-conditioning systems (especially for balanced ventilation systems).

The testo Smart App is compatible with the following Bluetooth®-enabled measuring instruments from Testo:
- All Testo Smart Probes
- Digital manifolds testo 550s/557s/550i/570s and testo 550/557
- Digital refrigerant scale testo 560i
- Vacuum pump testo 565i
- Flue gas analyser testo 300/310 II/310 II EN/310 II EN
- Vacuum gauge testo 552
- Clamp meter testo 770-3
- Volume flow hood testo 420
- Compact HVAC measuring instruments


Applications with the testo Smart App
Refrigeration systems, air conditioning systems and heat pumps:
- Leak test: Recording and analysis of the pressure drop curve.
- Superheat and subcooling: Automatic determination of condensation and evaporation temperature and calculation of superheat / subcooling.
- Target superheat: Automatic calculation of target superheat
- Automatic refrigerant charging by weight, by superheat, by subcooling
- Vacuum measurement: Graphical progress display of the measurement with indication of start and differential value


Indoor air quality and comfort level:
- Temperature and humidity: Automatic calculation of dew point and wet bulb temperature


Ventilation systems:
- Volume flow: After the intuitive input of the duct cross-section, the app calculates the volume flow fully automatically.
- Diffuser measurements: simple parameterisation of the diffuser (dimensions and geometry), comparison of the volume flows of several diffusers when setting up a ventilation system, continuous and multi-point average calculation.


Heating systems:- Flue gas measurement: Second screen function in combination with testo 300
- Measurement of gas flow and static gas pressure: Also possible parallel to the flue gas measurement (delta P)
- Measurement of flow and return temperatures (delta T)

---------------------------------------------------------
Terms of Use:
https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

Privacy Policy:
https://www.testo.com/en/company/privacy-policy-app