七麦数据

DPF Monitor für VAG ermöglicht es Ihnen, mehrere wichtige Datenpunkte zu sehen, die sich auf den Dieselpartikelfilter (DPF) beziehen, der in einem von VAG (Volkswagen, Audi, Skoda und SEAT) gebauten Dieselfahrzeug installiert ist. Durch die Sichtbarmachung dieser Daten ist es möglich, den Zustand Ihres DPF zu sehen, sowie wann eine Aktive Regeneration im Gange ist.

ERSTE SCHRITTE:

Schritt 1: Verbinden Sie Ihr unterstütztes Bluetooth/WiFi OBD2-Gerät
Schritt 2: Öffnen Sie die Anwendung und wählen Sie Ihr Gerät
Schritt 3: Wählen Sie eine geeignete Motorgruppe im Einstellungsmenü


UNTERSTÜTZTE GERÄTE:

Um die Anwendung zu verwenden, benötigen Sie ein OBD2-Gerät mit einem ELM327-Chip, der über das VAG UDS-Protokoll kommunizieren kann. Dieses Gerät muss Bluetooth Low Energy (4.0+) oder WiFi unterstützen.

Besuchen Sie https://www.dpfmonitor.com/device-requirements für weitere Details und empfohlene Geräte zum Kauf.

Benötigen Sie Hilfe beim Finden eines geeigneten Adapters? Haben Sie Verbindungsprobleme? Wenden Sie sich an den Entwickler für Unterstützung!


UNTERSTÜTZTE MOTOREN:

Die folgenden Motorcodes sollten unterstützt werden, obwohl dies von der im Steuergerät installierten Softwareversion abhängt.

CAAC, CAGA, CAHA, CAPA, CAYA, CAYB, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CFWA, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CTBA, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUB, CUWA, CVUA, CVUB, CVUC, CXEB, CXEC, CXFA, CXHA, CXXA, CXXB, DAUA, DAVA, DBGC, DBGC, DCXA, DCYA, DDXC, DDXE, DDWA, DDYA, DETA, DEUA, DEUC, DEWA, DEZE, DFBA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSD, DFSF, DGDB, DSSA, DGTC, DGTD, DGTE, DHXA, DJGA, DLUB, DMZA, DMZB, DNAA, DSTB, DTRD, DTPB, DTSB, DTTC, DTUA, DXBA, DXNB, DXRB, DXRC, und viele andere.

Wird Ihr Motorcode nicht als unterstützt angezeigt? Wenden Sie sich an den Entwickler, um dem Beta-Programm beizutreten und bei der Unterstützung zu helfen!


HABEN SIE EINE FRAGE / FUNKTIONIERT ETWAS NICHT?

Kontaktieren Sie den Entwickler für Unterstützung - ich helfe gerne bei allen Anfragen!

DPF Monitor für VAG ermöglicht es Ihnen, mehrere wichtige Datenpunkte zu sehen, die sich auf den Dieselpartikelfilter (DPF) beziehen, der in einem von VAG (Volkswagen, Audi, Skoda und SEAT) gebauten Dieselfahrzeug installiert ist. Durch die Sichtbarmachung dieser Daten ist es möglich, den Zustand Ihres DPF zu sehen, sowie wann eine Aktive Regeneration im Gange ist.

ERSTE SCHRITTE:

Schritt 1: Verbinden Sie Ihr unterstütztes Bluetooth/WiFi OBD2-Gerät
Schritt 2: Öffnen Sie die Anwendung und wählen Sie Ihr Gerät
Schritt 3: Wählen Sie eine geeignete Motorgruppe im Einstellungsmenü


UNTERSTÜTZTE GERÄTE:

Um die Anwendung zu verwenden, benötigen Sie ein OBD2-Gerät mit einem ELM327-Chip, der über das VAG UDS-Protokoll kommunizieren kann. Dieses Gerät muss Bluetooth Low Energy (4.0+) oder WiFi unterstützen.

Besuchen Sie https://www.dpfmonitor.com/device-requirements für weitere Details und empfohlene Geräte zum Kauf.

Benötigen Sie Hilfe beim Finden eines geeigneten Adapters? Haben Sie Verbindungsprobleme? Wenden Sie sich an den Entwickler für Unterstützung!


UNTERSTÜTZTE MOTOREN:

Die folgenden Motorcodes sollten unterstützt werden, obwohl dies von der im Steuergerät installierten Softwareversion abhängt.

CAAC, CAGA, CAHA, CAPA, CAYA, CAYB, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CFWA, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CTBA, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUB, CUWA, CVUA, CVUB, CVUC, CXEB, CXEC, CXFA, CXHA, CXXA, CXXB, DAUA, DAVA, DBGC, DBGC, DCXA, DCYA, DDXC, DDXE, DDWA, DDYA, DETA, DEUA, DEUC, DEWA, DEZE, DFBA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSD, DFSF, DGDB, DSSA, DGTC, DGTD, DGTE, DHXA, DJGA, DLUB, DMZA, DMZB, DNAA, DSTB, DTRD, DTPB, DTSB, DTTC, DTUA, DXBA, DXNB, DXRB, DXRC, und viele andere.

Wird Ihr Motorcode nicht als unterstützt angezeigt? Wenden Sie sich an den Entwickler, um dem Beta-Programm beizutreten und bei der Unterstützung zu helfen!


HABEN SIE EINE FRAGE / FUNKTIONIERT ETWAS NICHT?

Kontaktieren Sie den Entwickler für Unterstützung - ich helfe gerne bei allen Anfragen!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth/WiFi OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

To use the application, you require an OBD2 device with an ELM327 chip capable of communicating via the VAG UDS protocol. This device must support Bluetooth Low Energy (4.0+), or WiFi.

Visit https://www.dpfmonitor.com/device-requirements for more details and recommended devices for purchase.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CFWA, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUB, CXEB, CXEC, CXFA, CXHA, CXXB, DBGC, DBGC, DCXA, DCYA, DDXC, DDXE, DDYA, DETA, DEWA, DFBA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DSSA, DGTC, DGTD, DGTE, DJGA, DLUB, DMZA, DMZB, DNAA, DSTB, DTRD, DTTC, DTUA, DXBA, DXNB, DXRC, and many others.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth/WiFi OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

To use the application, you require an OBD2 device with an ELM327 chip capable of communicating via the VAG UDS protocol. This device must support Bluetooth Low Energy (4.0+), or WiFi.

Visit https://www.dpfmonitor.com/device-requirements for more details and recommended devices for purchase.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CFWA, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUB, CXEB, CXEC, CXFA, CXHA, CXXB, DBGC, DBGC, DCXA, DCYA, DDXC, DDXE, DDYA, DETA, DEWA, DFBA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DGTC, DGTD, DGTE, DJGA, DLUB, DMZA, DMZB, DNAA, DTRD, and many others.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

To use the application, you require an OBD2 device with an ELM327 chip capable of communicating via the VAG UDS protocol. This device must support Bluetooth Low Energy (4.0+).

Visit https://www.dpfmonitor.com/device-requirements for more details and recommended devices for purchase.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUB, CXEB, CXEC, CXFA, CXHA, CXXB, DBGC, DBGC, DCXA, DCYA, DDXC, DDXE, DDYA, DETA, DEWA, DFBA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DGTC, DGTD, DGTE, DJGA, DLUB, DMZA, DMZB, DNAA, DTRD, and many others.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

To use the application, you require an OBD2 device with an ELM327 chip capable of communicating via the VAG UDS protocol. This device must support Bluetooth Low Energy (4.0+).

Visit https://www.dpfmonitor.com/device-requirements for more details and recommended devices for purchase.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUB, CXEB, CXFA, CXHA, CXXB, DBGC, DBGC, DCXA, DCYA, DDYA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DGTC, DGTD, DGTE, DLUB, DMZA, DNAA, and many others.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

To use the application, you require an OBD2 device with an ELM327 chip capable of communicating via the VAG UDS protocol. This device must support Bluetooth Low Energy (4.0+).

Visit https://www.dpfmonitor.com/device-requirements for more details and recommended devices for purchase.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUUB, CXHA, DBGC, DBGC, DCXA, DCYA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DGTC, DGTD, DGTE, DLUB.

BETA support for CUSA, CUSB, CUTA, CXEB, CXFA, CXXB, DDYA, DMZA, DNAA.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!