七麦数据

DPF Monitor para VAG te permite ver varios puntos de datos importantes relacionados con el Filtro de Partículas Diésel (DPF) instalado en un vehículo diésel fabricado por VAG (Volkswagen, Audi, Skoda y SEAT). Al hacer visibles estos datos es posible ver la salud de tu DPF, así como cuándo una Regeneración Activa está en progreso.

PRIMEROS PASOS:

Paso 1: Conecta tu dispositivo OBD2 Bluetooth/WiFi compatible
Paso 2: Abre la aplicación y selecciona tu dispositivo
Paso 3: Selecciona un grupo de motor adecuado en el menú Configuración


DISPOSITIVOS COMPATIBLES:

Para usar la aplicación, necesitas un dispositivo OBD2 con un chip ELM327 capaz de comunicarse a través del protocolo VAG UDS. Este dispositivo debe soportar Bluetooth Low Energy (4.0+) o WiFi.

Visita https://www.dpfmonitor.com/device-requirements para más detalles y dispositivos recomendados para comprar.

¿Necesitas ayuda para encontrar un adaptador adecuado? ¿Tienes problemas de conectividad? ¡Contacta al desarrollador para asistencia!


MOTORES COMPATIBLES:

Los siguientes códigos de motor deberían ser compatibles, aunque esto depende de la versión de software instalada en la ECU.

CAAC, CAGA, CAHA, CAPA, CAYA, CAYB, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CFWA, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CTBA, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUB, CUWA, CVUA, CVUB, CVUC, CXEB, CXEC, CXFA, CXHA, CXXA, CXXB, DAUA, DAVA, DBGC, DBGC, DCXA, DCYA, DDXC, DDXE, DDWA, DDYA, DETA, DEUA, DEUC, DEWA, DEZE, DFBA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSD, DFSF, DGDB, DSSA, DGTC, DGTD, DGTE, DHXA, DJGA, DLUB, DMZA, DMZB, DNAA, DSTB, DTRD, DTPB, DTSB, DTTC, DTUA, DXBA, DXNB, DXRB, DXRC, y muchos otros.

¿Tu código de motor no aparece como compatible? ¡Contacta al desarrollador para unirte al Programa Beta y ayudar a que sea compatible!


¿TIENES UNA PREGUNTA / ALGO NO FUNCIONA?

Contacta al desarrollador para asistencia - ¡estaré encantado de ayudar con cualquier consulta!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth/WiFi OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

To use the application, you require an OBD2 device with an ELM327 chip capable of communicating via the VAG UDS protocol. This device must support Bluetooth Low Energy (4.0+), or WiFi.

Visit https://www.dpfmonitor.com/device-requirements for more details and recommended devices for purchase.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CFWA, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUB, CXEB, CXEC, CXFA, CXHA, CXXB, DBGC, DBGC, DCXA, DCYA, DDXC, DDXE, DDYA, DETA, DEWA, DFBA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DSSA, DGTC, DGTD, DGTE, DJGA, DLUB, DMZA, DMZB, DNAA, DSTB, DTRD, DTTC, DTUA, DXBA, DXNB, DXRC, and many others.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth/WiFi OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

To use the application, you require an OBD2 device with an ELM327 chip capable of communicating via the VAG UDS protocol. This device must support Bluetooth Low Energy (4.0+), or WiFi.

Visit https://www.dpfmonitor.com/device-requirements for more details and recommended devices for purchase.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CFWA, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUB, CXEB, CXEC, CXFA, CXHA, CXXB, DBGC, DBGC, DCXA, DCYA, DDXC, DDXE, DDYA, DETA, DEWA, DFBA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DGTC, DGTD, DGTE, DJGA, DLUB, DMZA, DMZB, DNAA, DTRD, and many others.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

To use the application, you require an OBD2 device with an ELM327 chip capable of communicating via the VAG UDS protocol. This device must support Bluetooth Low Energy (4.0+).

Visit https://www.dpfmonitor.com/device-requirements for more details and recommended devices for purchase.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUB, CXEB, CXEC, CXFA, CXHA, CXXB, DBGC, DBGC, DCXA, DCYA, DDXC, DDXE, DDYA, DETA, DEWA, DFBA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DGTC, DGTD, DGTE, DJGA, DLUB, DMZA, DMZB, DNAA, DTRD, and many others.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

To use the application, you require an OBD2 device with an ELM327 chip capable of communicating via the VAG UDS protocol. This device must support Bluetooth Low Energy (4.0+).

Visit https://www.dpfmonitor.com/device-requirements for more details and recommended devices for purchase.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUB, CXEB, CXFA, CXHA, CXXB, DBGC, DBGC, DCXA, DCYA, DDYA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DGTC, DGTD, DGTE, DLUB, DMZA, DNAA, and many others.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

To use the application, you require an OBD2 device with an ELM327 chip capable of communicating via the VAG UDS protocol. This device must support Bluetooth Low Energy (4.0+).

Visit https://www.dpfmonitor.com/device-requirements for more details and recommended devices for purchase.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUUB, CXHA, DBGC, DBGC, DCXA, DCYA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DGTC, DGTD, DGTE, DLUB.

BETA support for CUSA, CUSB, CUTA, CXEB, CXFA, CXXB, DDYA, DMZA, DNAA.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

To use the application, you require an OBD2 device with an ELM327 chip capable of communicating via the VAG UDS protocol. This device must support Bluetooth Low Energy (4.0+).

Visit https://www.dpfmonitor.com/device-requirements for more details and recommended devices for purchase.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUUB, CXHA, DBGC, DBGC, DCXA, DCYA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DGTC, DGTD, DGTE, DLUB.

BETA support for CUSA, CUSB, CUTA, CXEB, CXFA, CXXB, DDYA, DMZA, DNAA.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!