七麦数据

DPF Monitor per VAG ti permette di vedere diversi punti dati importanti relativi al Filtro Antiparticolato (DPF) installato in un veicolo diesel costruito da VAG (Volkswagen, Audi, Skoda e SEAT). Rendendo visibili questi dati è possibile vedere la salute del tuo DPF, così come quando una Rigenerazione Attiva è in corso.

INIZIARE:

Passo 1: Collega il tuo dispositivo OBD2 Bluetooth/WiFi supportato
Passo 2: Apri l'applicazione e seleziona il tuo dispositivo
Passo 3: Seleziona un gruppo motore adatto nel menu Impostazioni


DISPOSITIVI SUPPORTATI:

Per utilizzare l'applicazione, hai bisogno di un dispositivo OBD2 con un chip ELM327 capace di comunicare tramite il protocollo VAG UDS. Questo dispositivo deve supportare Bluetooth Low Energy (4.0+) o WiFi.

Visita https://www.dpfmonitor.com/device-requirements per maggiori dettagli e dispositivi raccomandati per l'acquisto.

Hai bisogno di aiuto per trovare un adattatore adatto? Hai problemi di connettività? Contatta lo sviluppatore per assistenza!


MOTORI SUPPORTATI:

I seguenti codici motore dovrebbero essere supportati, anche se questo dipende dalla versione software installata nella ECU.

CAAC, CAGA, CAHA, CAPA, CAYA, CAYB, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CFWA, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CTBA, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUB, CUWA, CVUA, CVUB, CVUC, CXEB, CXEC, CXFA, CXHA, CXXA, CXXB, DAUA, DAVA, DBGC, DBGC, DCXA, DCYA, DDXC, DDXE, DDWA, DDYA, DETA, DEUA, DEUC, DEWA, DEZE, DFBA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSD, DFSF, DGDB, DSSA, DGTC, DGTD, DGTE, DHXA, DJGA, DLUB, DMZA, DMZB, DNAA, DSTB, DTRD, DTPB, DTSB, DTTC, DTUA, DXBA, DXNB, DXRB, DXRC, e molti altri.

Il tuo codice motore non appare come supportato? Contatta lo sviluppatore per unirti al Programma Beta e aiutare a renderlo supportato!


HAI UNA DOMANDA / QUALCOSA NON FUNZIONA?

Contatta lo sviluppatore per assistenza - sarò felice di aiutare con qualsiasi domanda!

DPF Monitor per VAG ti permette di vedere diversi punti dati importanti relativi al Filtro Antiparticolato (DPF) installato in un veicolo diesel costruito da VAG (Volkswagen, Audi, Skoda e SEAT). Rendendo visibili questi dati è possibile vedere la salute del tuo DPF, così come quando una Rigenerazione Attiva è in corso.

INIZIARE:

Passo 1: Collega il tuo dispositivo OBD2 Bluetooth/WiFi supportato
Passo 2: Apri l'applicazione e seleziona il tuo dispositivo
Passo 3: Seleziona un gruppo motore adatto nel menu Impostazioni


DISPOSITIVI SUPPORTATI:

Per utilizzare l'applicazione, hai bisogno di un dispositivo OBD2 con un chip ELM327 capace di comunicare tramite il protocollo VAG UDS. Questo dispositivo deve supportare Bluetooth Low Energy (4.0+) o WiFi.

Visita https://www.dpfmonitor.com/device-requirements per maggiori dettagli e dispositivi raccomandati per l'acquisto.

Hai bisogno di aiuto per trovare un adattatore adatto? Hai problemi di connettività? Contatta lo sviluppatore per assistenza!


MOTORI SUPPORTATI:

I seguenti codici motore dovrebbero essere supportati, anche se questo dipende dalla versione software installata nella ECU.

CAAC, CAGA, CAHA, CAPA, CAYA, CAYB, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CFWA, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CTBA, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUB, CUWA, CVUA, CVUB, CVUC, CXEB, CXEC, CXFA, CXHA, CXXA, CXXB, DAUA, DAVA, DBGC, DBGC, DCXA, DCYA, DDXC, DDXE, DDWA, DDYA, DETA, DEUA, DEUC, DEWA, DEZE, DFBA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSD, DFSF, DGDB, DSSA, DGTC, DGTD, DGTE, DHXA, DJGA, DLUB, DMZA, DMZB, DNAA, DSTB, DTRD, DTPB, DTSB, DTTC, DTUA, DXBA, DXNB, DXRB, DXRC, e molti altri.

Il tuo codice motore non appare come supportato? Contatta lo sviluppatore per unirti al Programma Beta e aiutare a renderlo supportato!


HAI UNA DOMANDA / QUALCOSA NON FUNZIONA?

Contatta lo sviluppatore per assistenza - sarò felice di aiutare con qualsiasi domanda!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth/WiFi OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

To use the application, you require an OBD2 device with an ELM327 chip capable of communicating via the VAG UDS protocol. This device must support Bluetooth Low Energy (4.0+), or WiFi.

Visit https://www.dpfmonitor.com/device-requirements for more details and recommended devices for purchase.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CFWA, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUB, CXEB, CXEC, CXFA, CXHA, CXXB, DBGC, DBGC, DCXA, DCYA, DDXC, DDXE, DDYA, DETA, DEWA, DFBA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DSSA, DGTC, DGTD, DGTE, DJGA, DLUB, DMZA, DMZB, DNAA, DSTB, DTRD, DTTC, DTUA, DXBA, DXNB, DXRC, and many others.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth/WiFi OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

To use the application, you require an OBD2 device with an ELM327 chip capable of communicating via the VAG UDS protocol. This device must support Bluetooth Low Energy (4.0+), or WiFi.

Visit https://www.dpfmonitor.com/device-requirements for more details and recommended devices for purchase.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CFWA, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUB, CXEB, CXEC, CXFA, CXHA, CXXB, DBGC, DBGC, DCXA, DCYA, DDXC, DDXE, DDYA, DETA, DEWA, DFBA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DGTC, DGTD, DGTE, DJGA, DLUB, DMZA, DMZB, DNAA, DTRD, and many others.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

To use the application, you require an OBD2 device with an ELM327 chip capable of communicating via the VAG UDS protocol. This device must support Bluetooth Low Energy (4.0+).

Visit https://www.dpfmonitor.com/device-requirements for more details and recommended devices for purchase.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUB, CXEB, CXEC, CXFA, CXHA, CXXB, DBGC, DBGC, DCXA, DCYA, DDXC, DDXE, DDYA, DETA, DEWA, DFBA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DGTC, DGTD, DGTE, DJGA, DLUB, DMZA, DMZB, DNAA, DTRD, and many others.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!

DPF Monitor for VAG allows you to see several important data points relating to the Diesel Particulate Filter (DPF) installed in a diesel vehicle built by VAG (Volkswagen, Audi, Skoda, and SEAT). By making this data visible it is possible to see the health of your DPF, as well as when an Active Regeneration is in progress.

GETTING STARTED:

Step 1: Connect your supported Bluetooth OBD2 device
Step 2: Open the application and select your device
Step 3: Select a suitable engine group in the Settings menu


SUPPORTED DEVICES:

To use the application, you require an OBD2 device with an ELM327 chip capable of communicating via the VAG UDS protocol. This device must support Bluetooth Low Energy (4.0+).

Visit https://www.dpfmonitor.com/device-requirements for more details and recommended devices for purchase.

Need help finding a suitable dongle? Having connectivity issues? Please reach out to the developer for assistance!


SUPPORTED ENGINES:

The following engine codes should be supported, although this is dependent on the software version installed to the ECU.

CAGA, CAHA, CAPA, CAYA, CAYC, CCWA, CFCA, CFFB, CFGB, CFGB, CFGC, CFHA, CFHC, CFHD, CFJB, CGLB, CGLC, CJCA, CJCB, CJCD, CLAB, CLHA, CNHA, CNHC, CRBC, CRKB, CRLB, CRMB, CRUA, CSHA, CUAA, CUNA, CUPA, CUSA, CUSB, CUTA, CUUB, CXEB, CXFA, CXHA, CXXB, DBGC, DBGC, DCXA, DCYA, DDYA, DFCA, DFFA, DFGA, DFHA, DFLA, DFSB, DFSF, DGTC, DGTD, DGTE, DLUB, DMZA, DNAA, and many others.

Is your engine code not showing as supported? Get in touch with the developer to join the Beta Programme and help out in getting it supported!


GOT A QUESTION / SOMETHING NOT WORKING?

Contact the developer for assistance - I'm happy to help with any queries!