七麦数据

iPhone 与 Apple Watch 都可用！

纯本地蓝牙钥匙，不需要网络权限，也不需要 Tesla ID，不会收集您的任何信息或数据，没有任何隐私的担忧。

支持车型： Model 3 、Model Y 以及 2021年以后的 Model S、Model X （不支持老款 Model S 、Model X）

1. 如何配对？
注意！配对过程中，请保持手表面对自己且屏幕保持常亮。
请先进入车内，点击 Watch 上本应用首页的 配对按钮 -> 自动搜索蓝牙设备 -> 从信号最强的车辆中选择 -> 按钮提示刷卡，并在屏幕上确认

*如果周围有很多特斯拉，不清楚自己的车是哪一台，则可以去手机的蓝牙查看「已连接」钥匙设备名称，并在手表上选择配对同名设备。

2. 如何使用垂直召唤？
首先需要您的车辆已经购买或订阅了 EAP 或者 FSD，然后在 控制 -> AutoPilot自动辅助驾驶 -> 自定义召唤功能 中 「指定长按启用」设置为「否」的 。
设置好车辆以后，点击手表上的 「召唤」，车辆进入双闪灯模式后5秒内，点击 前或后移动 按钮即可。
*注意：使用时请留意周边环境，随时准备中止车辆移动。

3. 是否支持控制多辆特斯拉车辆？
暂不支持，后续会更新支持。可以移除当前钥匙后，更换车辆进行重新配对。

4. 是否支持无感解锁、无感启动驾驶？
受限于Apple Watch本身后台调用机制，需要您打开本应用，车辆才能感应到钥匙，从而无感解锁/启动。

5. 是否会影响原本的手机钥匙？
完全不影响，一台车可以同时连接同把钥匙，无论是多个蓝牙钥匙还是实体钥匙，均不影响。

6. 如何移除当前配对的蓝牙钥匙？
在车机的钥匙管理界面删除手表蓝牙钥匙，然后卸载本应用。

Compatible with iPhone and Apple Watch.
Xiatoe Keyfob (Tesla Key Fob for Apple Watch) functions just like the official Tesla key fob, which only requires Bluetooth for full functionality. The app does NOT require an internet connection or your Telsa credentials. We would NOT collect or store your personal information and data.

Supported vehicles: All Tesla Model 3 and Model Y, 2021 or later Model S and Model X

1. How do I pair Xiaote Keyfob? Please keep your Apple watch screen facing you during the process and make sure the screen is awake at all times. Sit in the driver's seat and put the car in Park. Open Xiaote Keyfob on your Apple Watch, and click on the Pair button. Grant Bluetooth permission by selecting OK. Select the vehicle with your Bluetooth key ID. ( You may see multiple vehicles if there are more than one Tesla vehicles around you. Please go to your iPhone Settings > Bluetooth, you'll see a connected device with an 18-digit alphanumeric name, which is your Bluetooth key ID.)

2. How do I operate Summon with Xiaote Keyfob? Please make sure Enhanced Auto Pilot (EAP) or Full Self-Driving (FSD) is enabled on your vehicle. Touch Controls > Autopilot > Customize Summon and set Require Continuous Press to No. After setting up the vehicle, click Summon on the watch, and within 5 seconds after the vehicle enters the double flashing light mode, click the button to move forward or backward. (Note: Please pay attention to the surrounding environment when using it, and be ready to stop the vehicle movement at any time.)

3. Can I pair multiple vehicles with Xiaote Keyfob? Not yet. The functionality is still in development and will be enabled with future updates. If you need to pair your Apple watch with another vehicle, please remove the currently paired vehicle and start the pairing process with another vehicle.

4. Does Xiaote Keyfob support automatic locking and unlocking? Automatic locking and unlocking are not fully supported. This is due to the limitations on Watch OS background processing, once the app is closed, the Bluetooth signal would be stopped. You would have to open the app on your Apple Watch for Xiaote Keyfob to function. Once the app is started, you could use it just like a normal Tesla key fob, as intended.

5. Would Xiaote Keyfob interfere with my phone key or key fob? No. Tesla allows simultaneous connections with multiple keys, they would not interfere with each other.

6. How to unpair Xiaote Keyfob? Touch Controls > Locks and remove the Apple watch keyfob from the list. Uninstall Xiaote Keyfob if needed.7. How to redownload or update Xiaote Keyfob on my Apple watch? Go to the App Store app on your Apple Watch (NOT on your iPhone), scroll to the bottom of the page, click Account > Purchased or Updates, find the app in the list and click to redownload or update.

Compatible with iPhone and Apple Watch.
Xiatoe Keyfob (Tesla Key Fob for Apple Watch) functions just like the official Tesla key fob, which only requires Bluetooth for full functionality. The app does NOT require an internet connection or your Telsa credentials. We would NOT collect or store your personal information and data.

Supported vehicles: All Tesla Model 3 and Model Y, 2021 or later Model S and Model X

1. How do I pair Xiaote Keyfob? Please keep your Apple watch screen facing you during the process and make sure the screen is awake at all times. Sit in the driver's seat and put the car in Park. Open Xiaote Keyfob on your Apple Watch, and click on the Pair button. Grant Bluetooth permission by selecting OK. Select the vehicle with your Bluetooth key ID. ( You may see multiple vehicles if there are more than one Tesla vehicles around you. Please go to your iPhone Settings > Bluetooth, you'll see a connected device with an 18-digit alphanumeric name, which is your Bluetooth key ID.)

2. How do I operate Summon with Xiaote Keyfob? Please make sure Enhanced Auto Pilot (EAP) or Full Self-Driving (FSD) is enabled on your vehicle. Touch Controls > Autopilot > Customize Summon and set Require Continuous Press to No. After setting up the vehicle, click Summon on the watch, and within 5 seconds after the vehicle enters the double flashing light mode, click the button to move forward or backward. (Note: Please pay attention to the surrounding environment when using it, and be ready to stop the vehicle movement at any time.)

3. Can I pair multiple vehicles with Xiaote Keyfob? Not yet. The functionality is still in development and will be enabled with future updates. If you need to pair your Apple watch with another vehicle, please remove the currently paired vehicle and start the pairing process with another vehicle.

4. Does Xiaote Keyfob support automatic locking and unlocking? Automatic locking and unlocking are not fully supported. This is due to the limitations on Watch OS background processing, once the app is closed, the Bluetooth signal would be stopped. You would have to open the app on your Apple Watch for Xiaote Keyfob to function. Once the app is started, you could use it just like a normal Tesla key fob, as intended.

5. Would Xiaote Keyfob interfere with my phone key or key fob? No. Tesla allows simultaneous connections with multiple keys, they would not interfere with each other.

6. How to unpair Xiaote Keyfob? Touch Controls > Locks and remove the Apple watch keyfob from the list. Uninstall Xiaote Keyfob if needed.7. How to redownload or update Xiaote Keyfob on my Apple watch? Go to the App Store app on your Apple Watch (NOT on your iPhone), scroll to the bottom of the page, click Account > Purchased or Updates, find the app in the list and click to redownload or update.

Compatible with iPhone and Apple Watch.
Xiatoe Keyfob (Tesla Key Fob for Apple Watch) functions just like the official Tesla key fob, which only requires Bluetooth for full functionality. The app does NOT require an internet connection or your Telsa credentials. We would NOT collect or store your personal information and data.

Supported vehicles: All Tesla Model 3 and Model Y, 2021 or later Model S and Model X

1. How do I pair Xiaote Keyfob? Please keep your Apple watch screen facing you during the process and make sure the screen is awake at all times. Sit in the driver's seat and put the car in Park. Open Xiaote Keyfob on your Apple Watch, and click on the Pair button. Grant Bluetooth permission by selecting OK. Select the vehicle with your Bluetooth key ID. ( You may see multiple vehicles if there are more than one Tesla vehicles around you. Please go to your iPhone Settings > Bluetooth, you'll see a connected device with an 18-digit alphanumeric name, which is your Bluetooth key ID.)

2. How do I operate Summon with Xiaote Keyfob? Please make sure Enhanced Auto Pilot (EAP) or Full Self-Driving (FSD) is enabled on your vehicle. Touch Controls > Autopilot > Customize Summon and set Require Continuous Press to No. After setting up the vehicle, click Summon on the watch, and within 5 seconds after the vehicle enters the double flashing light mode, click the button to move forward or backward. (Note: Please pay attention to the surrounding environment when using it, and be ready to stop the vehicle movement at any time.)

3. Can I pair multiple vehicles with Xiaote Keyfob? Not yet. The functionality is still in development and will be enabled with future updates. If you need to pair your Apple watch with another vehicle, please remove the currently paired vehicle and start the pairing process with another vehicle.

4. Does Xiaote Keyfob support automatic locking and unlocking? Automatic locking and unlocking are not fully supported. This is due to the limitations on Watch OS background processing, once the app is closed, the Bluetooth signal would be stopped. You would have to open the app on your Apple Watch for Xiaote Keyfob to function. Once the app is started, you could use it just like a normal Tesla key fob, as intended.

5. Would Xiaote Keyfob interfere with my phone key or key fob? No. Tesla allows simultaneous connections with multiple keys, they would not interfere with each other.

6. How to unpair Xiaote Keyfob? Touch Controls > Locks and remove the Apple watch keyfob from the list. Uninstall Xiaote Keyfob if needed.7. How to redownload or update Xiaote Keyfob on my Apple watch? Go to the App Store app on your Apple Watch (NOT on your iPhone), scroll to the bottom of the page, click Account > Purchased or Updates, find the app in the list and click to redownload or update.

Compatible with iPhone and Apple Watch.
Xiatoe Keyfob (Tesla Key Fob for Apple Watch) functions just like the official Tesla key fob, which only requires Bluetooth for full functionality. The app does NOT require an internet connection or your Telsa credentials. We would NOT collect or store your personal information and data.

Supported vehicles: All Tesla Model 3 and Model Y, 2021 or later Model S and Model X

1. How do I pair Xiaote Keyfob? Please keep your Apple watch screen facing you during the process and make sure the screen is awake at all times. Sit in the driver's seat and put the car in Park. Open Xiaote Keyfob on your Apple Watch, and click on the Pair button. Grant Bluetooth permission by selecting OK. Select the vehicle with your Bluetooth key ID. ( You may see multiple vehicles if there are more than one Tesla vehicles around you. Please go to your iPhone Settings > Bluetooth, you'll see a connected device with an 18-digit alphanumeric name, which is your Bluetooth key ID.)

2. How do I operate Summon with Xiaote Keyfob? Please make sure Enhanced Auto Pilot (EAP) or Full Self-Driving (FSD) is enabled on your vehicle. Touch Controls > Autopilot > Customize Summon and set Require Continuous Press to No. After setting up the vehicle, click Summon on the watch, and within 5 seconds after the vehicle enters the double flashing light mode, click the button to move forward or backward. (Note: Please pay attention to the surrounding environment when using it, and be ready to stop the vehicle movement at any time.)

3. Can I pair multiple vehicles with Xiaote Keyfob? Not yet. The functionality is still in development and will be enabled with future updates. If you need to pair your Apple watch with another vehicle, please remove the currently paired vehicle and start the pairing process with another vehicle.

4. Does Xiaote Keyfob support automatic locking and unlocking? Automatic locking and unlocking are not fully supported. This is due to the limitations on Watch OS background processing, once the app is closed, the Bluetooth signal would be stopped. You would have to open the app on your Apple Watch for Xiaote Keyfob to function. Once the app is started, you could use it just like a normal Tesla key fob, as intended.

5. Would Xiaote Keyfob interfere with my phone key or key fob? No. Tesla allows simultaneous connections with multiple keys, they would not interfere with each other.

6. How to unpair Xiaote Keyfob? Touch Controls > Locks and remove the Apple watch keyfob from the list. Uninstall Xiaote Keyfob if needed.7. How to redownload or update Xiaote Keyfob on my Apple watch? Go to the App Store app on your Apple Watch (NOT on your iPhone), scroll to the bottom of the page, click Account > Purchased or Updates, find the app in the list and click to redownload or update.