七麦数据

3pRally Pro: The Ultimate Tool for TSD Regularity Rally

3pRally is now subscription-based, but you can use all app functionalities for up to 45 minutes a day, after tapping "start", to test it out.

3pRally requires a device with GPS to function. The GPS sensor can be either internal (iPhone and iPad with Cellular) or external (e.g., Garmin GLO 2, Dual XGPS150A, etc.).

Main Features:
- Universal App
- Three Modes: Classic (focus on one data point at a time), Advanced (all relevant data at a glance), and Roadbook (follow a roadbook configured within the app)
- Roadbook Configuration
- Tips: get speed adjustments and time vs. ideal time
- GPS Calibration: Calibrate the app GPS against the calibration sector
- Comprehensive Information: Stage Number, Speeds, Time, and Distance are always available
- Voice Announcements: the app can announce Partial Distance, Current Speed, Average Speed and Tips with custom frequency (Settings)
- Beep Alerts: Keep track of the distance driven if you prefer not to use voice announcements
- Change the main information displayed by tapping the top of the screen (Classic Mode)
- Quick Restart: reset all counters and restart with two taps (Classic and Advanced Mode)
- Flic Integration: control the app via Flic and Flic 2, the smartest wireless buttons
- Unlink the average speed from the partial counters (time and distance)
- Show Current or Total Average speed in addition to partial average speed.
- Reverse Button: reverse distances if you missed a turn
- Pause Button: temporarily stop measurements (can be enabled/disabled in Settings).
- Position the Reset Buttons on the left or right
- GPS Reception Quality: test GPS reception quality (in Settings or by double-tapping the GPS Accuracy label)
- GPS Accuracy Selection: discard measurements that are not accurate enough (Settings)
- Manually or automatically save your tracks (enable Auto Save in Settings)
- Export saved tracks in GPX or KML format (accessible from the saved tracks list in the Map View)
- Works with miles and kilometers
- Dark Mode Support
- Reduce the risk of accidentally changing the view by enabling "two-finger swipe" and "double-tap buttons" (Settings)
- Visualize speeds with 1, 2, or no decimals (Settings).
- Visualize distances with 2 or 3 decimals (Settings).
- Auto-Start: delay the start by +30 secs, +60 secs, or configure a specific starting time (Settings)
- With Auto-start on, the app can count down (beep or voice) from 5 or 10 secs before the starting time (Settings)
- Show/hide the current position coordinates
- Sync the app's time with the Rally's "Official Time" (double-tap the time on the Main View)
- Display Time and Timers using the format/precision you prefer: seconds, tenths (12:59:59.9), hundredths (12:59:99), or thousandths (12:59:999) (Settings)
- Option to hide the average speeds (Settings)
- Enable audio confirmation for buttons (Settings)
- Works with most external GPS devices; tested with Garmin GLO 2 and Dual XGPS150A
- Distance Adjustment: Manually adjust distances by double-tapping the labels (when distances are the main information displayed). You can adjust distances by entering a new one, calibrate your GPS with official measures (applying a % calibration), or enter the new distance and let the app calculate it for you!

Support: You experienced an issue or want to suggest how to improve 3pRally? Tell us via support (at) 3pmaster.com or directly within the app (from the "Settings").

Note: Mobile Data connection is only required to access the maps. Continued use of GPS running in the background can dramatically decrease battery life.

Disclaimer: Please consider that 3pRally relies on the device GPS to measure the distances you travel. Accuracy may vary depending on the GPS satellite reception quality.

Thanks to icons8.com for several icons (http://icons8.com). Thanks to Alice & Flavia for their patience and to Quinten for his fantastic support!

3pRally Pro is the most complete tool for Regularity Rally (TSD).

3pRally needs a device with GPS to work. GPS sensor can be either the internal one (iPhone and iPad Cellular) or external (eg. Garmin GLO 2, Dual XGPS150A, etc)

Main features are:
- Universal App, works on both iPad and iPhone
- All the relevant information are always available on the Main View (Stage Number, Speed, Time and Distance)
- Let the app talk to you! It can announce Partial Distance, Current Speed & Average Speed with the frequency you need (Settings)
- You can get a “beep” to keep track of the distance you drove (if you don't like voice announcements)
- Change the main information displayed by simply tapping them from the top of the screen, or in Settings to show more info at the same time (iPhone only)
- Reset the partial counter (distance, time and average speed)
- Quick Restart to reset all the counters (Partial and Total) and restart with just two taps
- Control the app via Flic and Flic 2, the smartest wireless buttons (http://flic.io)
- Possibility to unlink the average speed from the partial counters (time and distance)
- Choose to show the Current or the Total Average speed (in addition to the partial average speed)
- Reverse/Rewind button to decrease the distances in case you missed a turn
- Pause button in case you need to temporarily stop the trail (to be enabled in Settings)
- Customise the position of the Reset Buttons on the screen (left or right)
- Test the GPS reception quality (in Settings or double tapping the GPS Accuracy on the main screen)
- Select the GPS accuracy to discard measurements that are not good enough
- Manually or automatically save your tracks (enable Auto Save to save them all)
- Add your own information to the saved tracks (name & description)
- Export the saved tracks in GPX or KML format (accessible from the saved tracks list in the Map View)
- Share pics of your tracks with your friends
- Works with miles or kilometres
- Dark Mode support
- Reduce the risk to erroneously change the view by enabling "two fingers swipe" & "double tap buttons (Settings)
- Speed an be visualised with 1, 2 or without decimals (Settings)
- Distances can be visualised with 2 or 3 decimals (Settings)
- Auto-start to delay the start by +30 secs, +60 secs or configure a specific time (Settings)
- with Auto-start on, you can have the app counting down (beep or voice) 5 or 10 secs before the starting time
- Show/hide the current position coordinates (on iPad or with “More Info” enabled on iPhone)
- Sync the app's time with the Rally's "Official Time"
- Display the Time and the Timers using the format you prefer between seconds, tenths (12:59:59.9), hundredths (12:59:99) or thousandths (12:59:999) (Settings)
- Possibility to hide the average speed (Settings)
- Audio confirmation for the navigations buttons (enabling "Sounds" in "Settings")
- It works with most of the external GPS, we tested Garmin GLO 2 and Dual XGPS150A

Manually adjust the distances by double-tapping the labels (when distances are the main information displayed). From there, you can:
- adjust the distances by entering the correct one
- calibrate your GPS with the official measures (applying a % calibration) or enter the new distance and the app will calculate it for you!

You experienced an issue or want to suggest how to improve 3pRally? Tell us via support (at) 3pmaster.com or directly within the app (from the "Settings")

Note:
Mobile Data connection is only required to access the maps.
Continued use of GPS running in the background can dramatically decrease battery life.

Disclaimer:
Please consider that 3pRally relies on the device GPS to measure the distances you travel. Accuracy may vary depending of the GPS satellite reception quality.

Thanks to icons8.com for several icons (http://icons8.com).
Thanks to Alice & Flavia for their patience and to Quinten for his fantastic support!

3pRally Pro is the most complete tool for Regularity Rally (TSD).

3pRally needs a device with GPS to work. GPS sensor can be either the internal one (iPhone and iPad Cellular) or external (eg. Garmin GLO 2, Dual XGPS150A, etc)

Main features are:
- Universal App, works on both iPad and iPhone
- All the relevant information are always available on the Main View (Stage Number, Speed, Time and Distance)
- Let the app talk to you! It can announce Partial Distance, Current Speed & Average Speed with the frequency you need (Settings)
- You can get a “beep” to keep track of the distance you drove (if you don't like voice announcements)
- Change the main information displayed by simply tapping them from the top of the screen, or in Settings to show more info at the same time (iPhone only)
- Reset the partial counter (distance, time and average speed)
- Quick Restart to reset all the counters (Partial and Total) and restart with just two taps
- Control the app via Flic and Flic 2, the smartest wireless buttons (http://flic.io)
- Possibility to unlink the average speed from the partial counters (time and distance)
- Choose to show the Current or the Total Average speed (in addition to the partial average speed)
- Reverse/Rewind button to decrease the distances in case you missed a turn
- Pause button in case you need to temporarily stop the trail (to be enabled in Settings)
- Customise the position of the Reset Buttons on the screen (left or right)
- Test the GPS reception quality (in Settings or double tapping the GPS Accuracy on the main screen)
- Select the GPS accuracy to discard measurements that are not good enough
- Manually or automatically save your tracks (enable Auto Save to save them all)
- Add your own information to the saved tracks (name & description)
- Export the saved tracks in GPX or KML format (accessible from the saved tracks list in the Map View)
- Share pics of your tracks with your friends
- Works with miles or kilometres
- Dark Mode support
- Reduce the risk to erroneously change the view by enabling "two fingers swipe" & "double tap buttons (Settings)
- Speed an be visualised with 1, 2 or without decimals (Settings)
- Distances can be visualised with 2 or 3 decimals (Settings)
- Auto-start to delay the start by +30 secs, +60 secs or configure a specific time (Settings)
- with Auto-start on, you can have the app counting down (beep or voice) 5 or 10 secs before the starting time
- Show/hide the current position coordinates (on iPad or with “More Info” enabled on iPhone)
- Sync the app's time with the Rally's "Official Time"
- Display the Time and the Timers using the format you prefer between seconds, tenths (12:59:59.9), hundredths (12:59:99) or thousandths (12:59:999) (Settings)
- Possibility to hide the average speed (Settings)
- Audio confirmation for the navigations buttons (enabling "Sounds" in "Settings")
- It works with most of the external GPS, we tested Garmin GLO 2 and Dual XGPS150A

Manually adjust the distances by double-tapping the labels (when distances are the main information displayed). From there, you can:
- adjust the distances by entering the correct one
- calibrate your GPS with the official measures (applying a % calibration) or enter the new distance and the app will calculate it for you!

You experienced an issue or want to suggest how to improve 3pRally? Tell us via support (at) 3pmaster.com or directly within the app (from the "Settings")

Note:
Mobile Data connection is only required to access the maps.
Continued use of GPS running in the background can dramatically decrease battery life.

Disclaimer:
Please consider that 3pRally relies on the device GPS to measure the distances you travel. Accuracy may vary depending of the GPS satellite reception quality.

Thanks to icons8.com for several icons (http://icons8.com).
Thanks to Alice & Flavia for their patience and to Quinten for his fantastic support!

3pRally Pro is the most complete tool for Regularity Rally (TSD).

3pRally needs a device with GPS to work. GPS sensor can be either the internal one (iPhone and iPad Cellular) or external (eg. Garmin GLO 2, Dual XGPS150A, etc)

Main features are:
● Universal App, works on both iPad and iPhone
● All the relevant information are always available on the Main View (Stage Number, Speed, Time and Distance)
● Let the app talk to you! It can announce Speed and Average Speed with the frequency you need ("Settings")
● Change the main information displayed by simply tapping them from the top of the screen, or in Settings to show more info at the same time (iPhone only)
● Reset the partial counter (distance, time and average speed)
● "Quick Restart" to reset all the counters (Partial and Total) and restart with just two taps (we need to ask you for the confirmation, right!?!)
● Control the app via Flic and Flic 2, the smartest wireless buttons (http://flic.io)
● Possibility to "unlock" the average speed from the partial counters (time and distance)
● Manual adjustment of the distances (and so the speeds) is available at any time
● Choose to show the Current or the Total Average speed (in addition to the partial average speed)
● Reverse/Rewind button to decrease the down distances in case you missed a turn
● Pause button in case you need to temporarily stop the trail (to be enabled from the Settings)
● Show your track in real time on the map
● Customise the position of the Reset Buttons on the screen (left or right)
● Test the GPS reception quality (in Settings or double tapping the label with the GPS Accuracy on the main screen)
● Select the GPS accuracy to discard measurements that are not good enough
● Manually or automatically save your tracks (enable Auto Save to save them all)
● Add your own informations to the saved tracks (name & description/notes)
● Possibility to export the saved tracks in GPX or KML format (accessible from the saved tracks list in the Map View)
● Share an image of your track with your friends
● Works with miles or kilometres, by using your device's settings or choosing in the "Settings"
● "Dark Mode" support to use the app during the night or with low light situations ("Settings")
● Reduce the risk to erroneously change the view by enabling "two fingers swipe" & "double tap buttons ("Settings")
● Possibility to show the speed with or without decimals ("Settings")
● Sync the app's time with the Rally's "Official Time"
● Display the Time and the Timers using the format you prefer between seconds, tenths (12:59:59.9), hundredths (12:59:99) or thousandths (12:59:999) ("Settings")
● Possibility to hide the average speed (Settings)
● Audio confirmation for the navigations buttons (enabling "Sounds" in "Settings")
● It works with most of the external GPS, we tested Garmin GLO 2 and Dual XGPS150A

Manually adjust the distances by double-tapping the labels (when distances are the main information displayed). From there, you can:
● adjust the distances by entering the correct one
● calibrate your GPS with the official measures (applying a % calibration)
● not enough time to calculate the adjustment? Just enter the new distance and the app will calculate it for you!

Need a new feature? You experienced an issue or want to suggest us how to improve our 3pRally? Tell us via support (at) 3pmaster.com, directly within the app (from the "Settings") or via our support site (see below).

Note:
Mobile Data connection is only required to access the maps.
Continued use of GPS running in the background can dramatically decrease battery life.

Disclaimer:
Please consider that 3pRally relies on the device GPS to measure the distances you travel. Accuracy may vary depending of the GPS satellite reception quality.

Thanks:
Thanks to icons8.com for several icons (http://icons8.com).
Thanks to Alice & Flavia for their patience and to Quinten for his fantastic support!

3pRally Pro is the most complete tool for Regularity Rally (TSD).

Using 3pRally Pro you will be able to be always a step ahead, thanks to the easiness of use and the high level of customisations available.

Main features are:
● Universal App, works on both iPad and iPhone
● All the relevant information are always available on the Main View (Stage Number, Speed, Time and Distance)
● Let the app talk to you! It can announce Speed and Average Speed with the frequency you need ("Settings")
● Change the main information displayed by simply tapping them from the top of the screen
● Reset the partial counter (distance, time and average speed)
● "Quick Restart" to reset all the counters (Partial and Total) and restart with just two taps (we need to ask you for the confirmation, right!?!)
● Control the app via Flic and Flic 2, the smartest wireless buttons (http://flic.io)
● Possibility to "unlock" the average speed from the partial counters (time and distance)
● Manual adjustment of the distances (and so the speeds) is available at any time
● Choose to show the Current or the Total Average speed (in addition to the partial average speed)
● Reverse/Rewind button to decrease the drown distances in case you missed a turn
● Pause button in case you need to temporarily stop the trail (to be enabled from the Settings)
● Show your track in real time on the map
● Customise the position of the Reset Buttons on the screen (left or right)
● Test the GPS reception quality (in Settings or double tapping the label with the GPS Accuracy on the main screen)
● Select the GPS accuracy to discard measurements that are not good enough
● Manually or automatically save your tracks (enable Auto Save to save them all)
● Add your own informations to the saved tracks (name & description/notes)
● Possibility to export the saved tracks in GPX or KML format (accessible from the saved tracks list in the Map View)
● Share an image of your track with your friends
● Works with miles or kilometres, by using your device's settings or choosing in the "Settings"
● "Dark Mode" support to use the app during the night or with low light situations ("Settings")
● Reduce the risk to erroneously change the view by enabling "two fingers swipe" & "double tap buttons ("Settings")
● Possibility to show the speed with or without decimals ("Settings")
● Sync the app's time with the Rally's "Official Time"
● Display the Time and the Timers using the format you prefer between seconds, tenths (12:59:59.9), hundredths (12:59:99) or thousandths (12:59:999) ("Settings")
● Possibility to hide the average speed (Settings)
● Audio confirmation for the navigations buttons (enabling "Sounds" in "Settings")
● It works with most of the external GPS, we tested Garmin GLO 2 and Dual XGPS150A
● Need support? An in-app tutorial and a contextual help are always available within the app. Give them a try!

Manually adjust the distances by double-tapping the labels (when distances are the main information displayed). From there, you can:
● adjust the distances by entering the correct one
● calibrate your GPS with the official measures (applying a % calibration)
● not enough time to calculate the adjustment? Just enter the new distance and the app will calculate it for you!

Need a new feature? You experienced an issue or want to suggest us how to improve our 3pRally? Tell us via support (at) 3pmaster.com, directly within the app (from the "Settings") or via our support site (see below).

Note:
Mobile Data connection is only required to access the maps.
Continued use of GPS running in the background can dramatically decrease battery life.

Disclaimer:
Please consider that 3pRally relies on the device GPS to measure the distances you travel. Accuracy may vary depending of the GPS satellite reception quality.

Thanks:
Thanks to icons8.com for several icons (http://icons8.com).
Thanks to Alice & Flavia for their patience and to Quinten for his fantastic support!

3pRally Pro is the most complete tool for Regularity Rally (TSD).

Now integrated with Flic and Flic 2, the smartest wireless buttons (http://flic.io)!

Using 3pRally Pro you will be able to be always a step ahead, thanks to the easiness of use and the high level of customisations available.

Main features are:
● Universal App, works on both iPad and iPhone
● All the relevant information are always available on the Main View (Stage Number, Speed, Time and Distance)
● Change the main information displayed by simply tapping them from the top of the screen
● Reset the partial counter
● "Quick Restart" to reset all the counters (Partial and Total) and restart with just two taps (we need to ask you for the confirmation, right!?!)
● Control the app via Flic and Flic 2, the smartest wireless buttons (http://flic.io)
● Possibility to "unlock" the average speed from the partial counters (time and distance)
● Manual adjustment of the distances (and so the speeds) is available at any time
● Choose to show the Current or the Total Average speed (in addition to the partial average speed)
● Reverse/Rewind button to decrease the drown distances in case you missed a turn (or similar)
● Pause button in case you need to temporarily stop the trail (to be enabled from the Settings)
● Show your track in real time on the map
● Customise the position of the Reset Buttons on the screen (left or right)
● Test the GPS reception quality (in Settings)
● Manually or automatically save your tracks (enable Auto Save to save them all)
● Add your own informations to the saved tracks (name and description/notes)
● Possibility to export the saved tracks in GPX or KML format (accessible from the saved tracks list in the Map View)
● Share an high definition image of your track with your friends
● Works with miles or kilometres, by choosing your device settings or letting you choose what you prefer ("Settings")
● "Dark Mode" support to use the app during the night or with low light situations (you can customise it in "Settings")
● Reduce the risk to erroneously change the view by enabling the "two fingers swipe" ("Settings")
● Possibility to show the speed with or without decimals ("Settings")
● Sync the app's time with the Rally's "Official Time"
● Possibility to hide the average speed (Settings)
● Need support? An in-app tutorial and a contextual help are always available within the app. Give them a try!

Manually adjust the distances by double-tapping the distance labels (when distances are the main information displayed). From there, you can:
● adjust the distances by entering the correct one
● calibrate your GPS with the official measures (applying a % calibration)
● not enough time to calculate theadjustment? Just enter the new distance and the app will calculate it for you!

Need a new feature? You experienced an issue or want to suggest us how to improve our 3pRally? Tell us via support (at) 3pmaster.com, directly within the app (from the "Settings") or via our support site (see below).

Note:
Mobile Data connection is only required to access the maps.
Continued use of GPS running in the background can dramatically decrease battery life.

Disclaimer:
Please consider that 3pRally relies on the device GPS to measure the distances you travel. Accuracy may vary depending of the GPS satellite reception quality.

Thanks:
Thanks to icons8.com for several icons (http://icons8.com).
Thanks to Alice & Flavia for their patience and to Quinten for his fantastic support!

3pRally Pro is the most complete tool for Regularity Rally (TSD).

Now integrated with Flic and Flic 2, the smartest wireless buttons (http://flic.io)!

Using 3pRally Pro you will be able to be always a step ahead, thanks to the easiness of use and the high level of customisations available.

Main features are:
● Universal App, works on both iPad and iPhone
● All the relevant information are always available on the Main View (Stage Number, Speed, Time and Distance)
● Change the main information displayed by simply tapping them from the top of the screen
● Reset the partial counter
● "Quick Restart" to reset all the counters (Partial and Total) and restart with just two taps (we need to ask you for the confirmation, right!?!)
● Control the app via Flic and Flic 2, the smartest wireless buttons (http://flic.io)
● Possibility to "unlock" the average speed from the partial counters (time and distance)
● Manual adjustment of the distances (and so the speeds) is available at any time
● Choose to show the Current or the Total Average speed (in addition to the partial average speed)
● Reverse/Rewind button to decrease the drown distances in case you missed a turn (or similar)
● Pause button in case you need to temporarily stop the trail (to be enabled from the Settings)
● Show your track in real time on the map
● Customise the position of the Reset Buttons on the screen (left or right)
● Test the GPS reception quality (in Settings)
● Manually or automatically save your tracks (enable Auto Save to save them all)
● Add your own informations to the saved tracks (name and description/notes)
● Possibility to export the saved tracks in GPX or KML format (accessible from the saved tracks list in the Map View)
● Share an high definition image of your track with your friends
● Works with miles or kilometres, by choosing your device settings or letting you choose what you prefer ("Settings")
● "Dark Mode" support to use the app during the night or with low light situations (you can customise it in "Settings")
● Reduce the risk to erroneously change the view by enabling the "two fingers swipe" ("Settings")
● Possibility to show the speed with or without decimals ("Settings")
● Sync the app's time with the Rally's "Official Time"
● Possibility to hide the average speed (Settings)
● Need support? An in-app tutorial and a contextual help are always available within the app. Give them a try!

Manually adjust the distances by double-tapping the distance labels (when distances are the main information displayed). From there, you can:
● adjust the distances by entering the correct one
● calibrate your GPS with the official measures (applying a % calibration)
● not enough time to calculate theadjustment? Just enter the new distance and the app will calculate it for you!

Need a new feature? You experienced an issue or want to suggest us how to improve our 3pRally? Tell us via support (at) 3pmaster.com, directly within the app (from the "Settings") or via our support site (see below).

Note:
Mobile Data connection is only required to access the maps.
Continued use of GPS running in the background can dramatically decrease battery life.

Disclaimer:
Please consider that 3pRally relies on the device GPS to measure the distances you travel. Accuracy may vary depending of the GPS satellite reception quality.

Thanks:
Thanks to icons8.com for several icons (http://icons8.com).
Thanks to Alice & Flavia for their patience and to Quinten for his fantastic support!